Manufacturer S Default Setting; Temperature Alarm - Boser HS-6011L Manual

2.15 LCD 3.3/5.0v Power Select
The HS-6011 provides a select for unsing the LCD Panel with 3.3V
or 5.0V as setting in the following:
LCD Power Select of JP4:
LCD Power Type
5.0V
* 3.3V
2.16 Manufacturer's Default Setting
The HS-6011 has some jumpers which are for design use only.
Please set as the board provides of the manufacturer's default
setting in the following:
Manufacturer's Default Setting of JP3 :
Manufacturer's
JP3

2.17 Temperature Alarm

The HS-6011 provides a select for Hardware temperature Alarm. If
the CPU's temperature reached 60°C±10%, the warning "beep" will
be come out. And it will stop as the CPU's temperature going down
below 60°C±10% again.
Temperature Alarm Default Setting of JP7:
Temperature Alarm
Enabled
Disabled
20
JP4
2-3
1-2
Setting
* OFF
JP7
ON
OFF