Setting The Rtc Configuration; System Memory Dram; Atx/At Power Select - Boser HS-6011L Manual

2.9 Setting the RTC Configuration

The HS-6011 provides a setting for the selection of the RTC Clear
Jumper by JP13 setting as following:
CMOS Setting of JP13: (DS12B887)
CMOS Clear Jumper
Normal
Clear CMOS

2.10 System Memory DRAM

The HS-6011 provides a wide range on-board DRAM memory by
two pieces DIMM sockets (DIMM-1, DIMM-2) request the access
time should meet PC-100 standard.. The maximum capacity of the
on board memory is 1.0GBytes.
See the figure on section 2.3 for get the identifying the banks.

2.11 ATX/AT Power Select

The HS-6011 provides a selection by a three-pin jumper JP6 for setting
the power supply type in using.
ATX/AT Power Select Setting of JP6:
Power Supply In Using
ATX Power Supply
AT Power Supply
16
JP13
* OFF
ON
JP6
2-3
* 1-2