1. Manuals
  2. Brands
  3. Boser Manuals
  4. Single board computers
  5. HS-6011L
  6. Manual

Boser HS-6011L Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
®
Pentium
-II-III-Celeron BX L/VGA LAN
•PICMG Bus Full Size•All-in-one•CRT/Panel•RS-232/422/485•
•DMA33•WDT•DOC•USB•IrDA•LAN•PC/104•CTA•
•100MHz Bus•Pentium
®
Pentium
-II-III-Celeron BX L/VGA
•PICMG Bus Full Size•All-in-one•CRT/Panel•RS-232/422/485•
•DMA33•WDT•DOC•USB•IrDA•PC/104•CTA•
•100MHz Bus•Pentium
®
Pentium
-II-III-Celeron BX LAN
•PICMG Bus Full Size•All-in-one•RS-232/422/485•
•DMA33•WDT•DOC•USB•IrDA•LAN•PC/104•CTA•
•100MHz Bus•Pentium
®
Pentium
•PICMG Bus Full Size•All-in-one•RS-232/422/485•
•DMA33•WDT•DOC•USB•IrDA•PC/104•CTA•
•100MHz Bus•Pentium
HS-6011
®
-II-III-Celeron CPU at Face-Side•
HS-6011V
®
-II-III-Celeron CPU at Face-Side•
HS-6011L
®
-II-III-Celeron CPU at Face-Side•
HS-6011P
-II-III-Celeron BX ISB
®
-II-III-Celeron CPU at Face-Side•

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HS-6011L and is the answer not in the manual?

Questions and answers

Related Manuals for Boser HS-6011L

Summary of Contents for Boser HS-6011L

  • Page 1 -II-III-Celeron CPU at Face-Side• HS-6011V ® Pentium -II-III-Celeron BX L/VGA •PICMG Bus Full Size•All-in-one•CRT/Panel•RS-232/422/485• •DMA33•WDT•DOC•USB•IrDA•PC/104•CTA• ® •100MHz Bus•Pentium -II-III-Celeron CPU at Face-Side• HS-6011L ® Pentium -II-III-Celeron BX LAN •PICMG Bus Full Size•All-in-one•RS-232/422/485• •DMA33•WDT•DOC•USB•IrDA•LAN•PC/104•CTA• ® •100MHz Bus•Pentium -II-III-Celeron CPU at Face-Side• HS-6011P ®...
  • Page 2 Trademarks BOSER is registered trademark of BOSER Technology Co., Ltd. ISB is registered trademark of BOSER Technology Co., Ltd. Intel is a registered trademark of Intel Corporation.

  • Page 3: Table Of Contents

    Contents HS-6011 ......................1 HS-6011V....................1 HS-6011L ....................1 HS-6011P....................1 GENERAL INFORMATION ................3 1.1 M ..................4 AJOR EATURES 1.2 S ..................5 PECIFICATIONS 1.3 D ...................7 ELIVERY ACKAGE HARDWARE INSTALLATION ................8 2.1 C .............8 AUTION OF TATIC LECTRICITY 2.2 C ......9 AUTION ON NPACKING AND...
  • Page 4 3.6 P ..............27 ARALLEL ONNECTOR 3.7 T ...........28 LOPPY RIVE ONNECTOR 3.8 S ..............29 ERIAL ORTS ONNECTORS 3.9 K ...............31 EYBOARD ONNECTORS 3.10 PS/2 M -DIN C .........31 OUSE ONNECTOR 3.11 VGA-CRT C ...............32 ONNECTOR 3.12 F ..............33 ANEL ONNECTOR 3.13 IR C ..................35 ONNECTOR...

  • Page 5: General Information

    Chapter-1 General Information ® The HS-6011 is a bus-100MHz Intel BX chipset design PICMG bus ® Pentium II-III-Celeron Industrial Single Board (I.S.B.) CPU card with features combine together to make it an ideal all-in-one industrial single board computer, enhanced I/O effects with VGA interface supports LCD Display panel and CRT Monitor on-board.

  • Page 6: Major Features

    1.1 Major Features ® One axial-horizontal type Slot-1 socket at face-side for Intel ® Pentium II-III-Celeron 233〜650 MHz Processors. ® Intel 82443 BX chipset. PICMG add-on bus with on-board PC/104 bus connector for 8/16-bit supported. Two pieces DIMM sockets supports DRAM up to 1.0 GB. Two fast PCI DMA33-IDE connector support four IDE drives include large size hard disks, CD-ROM, tape backup etc.

  • Page 7: Specifications

    1.2 Specifications ® ® CPU: One piece Intel Pentium II-III-Celeron 233/ 266/ 300/ 333/ 400/450/500/650MHz. Bus interface: PICMG bus, comply with ISA and PCI slot One on-board PC/104 bus connector. ® Chipset: Intel 82443 BX bus-100MHz chipset. Data bus: 64-bit Processing ability: 64-bit ®...
  • Page 8 The HS-6011 provides with VGA Interface to LCD and Monitor, IDE-DMA33, WDT, DOC, USB, IrDA and LAN etc. The HS-6011V provides with all function but without LAN. The HS-6011L provides with all function but without VGA. The HS-6011P provides with all function but without VGA and without LAN.

  • Page 9: Delivery Package

    1.3 Delivery Package The delivery package of HS-6011 includes all following items: One HS-6011 Industrial Single Board One Printer Port Bracketed Flat Cable One COM Port Bracketed Flat Cable Two IDE port Flat Cable One FDD port Flat Cable One PS/2 to Standard DIN type Keyboard Transfer Cable Utility Diskette User’s Manual 5 pin ATX Power Connector Cable...

  • Page 10: Hardware Installation

    Chapter-2 Hardware Installation This chapter provides the information on how to install the hardware of HS-6011. At first, please follow up sections 1.3, 2.1 and 2.2 in check the delivery package and carefully unpacking. Following after, the jumpers setting of switch, watchdog timer and the DiskOnChip...

  • Page 11: Caution On Unpacking And Before Installation

    2.2 Caution on Unpacking and Before Installation First of all, please follow with all necessary steps of section 2.1 in protection the HS-6011 from electricity discharge. With refer to section 1.3, please check the delivery package again with following steps: 1.

  • Page 12: Hs-6011'S Layout

    2.3 HS-6011’s Layout...

  • Page 13: Quick Listing Of Jumpers

    2.4 Quick Listing of Jumpers ................P.14 ESET ............P.26 LOCK ELECT ..........P.19 ANEL OLTAGE ELECT ............P.14 LOCK ATIO SELECT AT/ATX P ......... P.14 OWER UNCTION ELECT CPU T ..........P.15 EMPERATURE LARM RS-422/485 R ..P.27 ECEIVER ENABLED ISABLED ELECT RS-422/485 T...

  • Page 14: Quick Listing Of Connectors

    2.5 Quick Listing of Connectors ............ P.21 EYLOCK ONNECTOR ............ P.18 PEAKER ONNECTOR IDE LED................ P.19 FAN C ........... P.20 ONNECTOR ATX P ........P.18 OWER ONNECTOR ......... P.19 EYBOARD ONNECTOR ..........P.14 OWER ONNECTOR IDE C ..........P.14 RIMARY ONNECTOR IDE C .........

  • Page 15: Jumper Setting Description

    2.6 Jumper Setting Description A jumper pin-set is ON as a shorted circuit with a plastic cap inserted over two pins. A jumper pin-set is OFF as a open circuit with a plastic cap inserted over one or no pin(s) between pins. The below figure 2.2 shows the examples of different jumper pin-set setting as ON or OFF in this manual.

  • Page 16: Setting The Bus-Clock Frequency

    2.7 Setting the Bus-Clock Frequency The HS-6011 provides all necessary by jumper setting in using Bus-Clock frequency as the system bus clocking with JP2 setting as following: Bus-Clock Frequency Setting of JP2: Bus-Clock Frequency * 100MHz 66MHz...

  • Page 17: Frequency Multiplier Setting

    2.8 Frequency Multiplier Setting The HS-6011 provides JP5 for define the selection of the Frequency Multiplier value of system bus to processor core in following table: Frequency Multiplier Setting of JP5: Frequency Multiplier: System Clock JP5 ON JP5 OFF System Bus to * 100 Processor Core 2.5x...

  • Page 18: Setting The Rtc Configuration

    2.9 Setting the RTC Configuration The HS-6011 provides a setting for the selection of the RTC Clear Jumper by JP13 setting as following: CMOS Setting of JP13: (DS12B887) CMOS Clear Jumper JP13 Normal * OFF Clear CMOS 2.10 System Memory DRAM The HS-6011 provides a wide range on-board DRAM memory by two pieces DIMM sockets (DIMM-1, DIMM-2) request the access time should meet PC-100 standard..

  • Page 19: Watch-Dog Timer

    2.12 Watch-Dog Timer There are three access cycles of Watch-Dog Timer as Enable, Refresh and Disable. The Enable cycle should proceed by READ PORT 443H. The Disable cycle should proceed by READ PORT 045H. A continue Enable cycle after a first Enable cycle means Refresh.
  • Page 20 The Watch-dog timer is disabled after the system Power-On. The watch-dog timer can be enabled by a Enable cycle with reading the control port (443H), a Refresh cycle with reading the control port (443H) and a Disable cycle by reading the Watch-dog timer disable control port (045H).

  • Page 21: Pci Vga Controller

    2.13 PCI VGA Controller The HS-6011 has built-in a C&T 69000 VGA Controller with on-chip 2 MB memory, support resolutions up to 1280 x 1024 256 colors to VGA-CRT monitor. The HS-6011 also provides one 50-pin internal LCD Panel connector CN10, and reserved internal 10-pin VGA-CRT header connector.

  • Page 22: Manufacturer S Default Setting

    2.15 LCD 3.3/5.0v Power Select The HS-6011 provides a select for unsing the LCD Panel with 3.3V or 5.0V as setting in the following: LCD Power Select of JP4: LCD Power Type 5.0V * 3.3V 2.16 Manufacturer’s Default Setting The HS-6011 has some jumpers which are for design use only. Please set as the board provides of the manufacturer’s default setting in the following: Manufacturer’s Default Setting of JP3 :...

  • Page 23: Retention Mechanism

    2.18 Retention Mechanism For SECC2 PII/III processor types, use the two caps on both ends after installing the processor to secure the installation. SECC types do not require these caps.

  • Page 24: Connection

    Chapter-3 Connection This chapter gives all necessary information of the peripheral's connections, switches and indicators. 3.1 Power and FAN Connectors The HS-6011 provides one 4-pin DC-Power connector as following CN7 pin information. And also provides one 3-pin fan out connector at solder side as following CN4 pin information.

  • Page 25: Ide's Led, Key-Lock And Reset Button

    3.2 IDE's LED, Key-Lock and Reset Button The HS-6011 has one LED ( D4 ) indicates out power-on status. And the following provides the pin information for IDE's LED connector, Key-Lock and Reset Button connections from CN3, CN1 and JP1. CN3 : IDE LED connector PIN NO.

  • Page 26: Extra Speaker Connector

    3.3 Extra Speaker Connector The HS-6011 has an on-board buzzer ( BZ1 ). And it also provides the CN2 in allows user to connecting to the external speaker. CN2 : Speaker Connector PIN NO. DESCRIPTION SPEAKER SIGNAL GROUND...

  • Page 27: Pci E-Ide Drive Connector

    3.4 PCI E-IDE Drive Connector Two standard 40-pin header daisy-chain driver connectors provide as CN8 and CN9 with following pin assignment. Total four IDE (Integrated Device Electronics) drivers may connect. CN8 (IDE 1) : Primary IDE Connector CN8 : IDE Interface Connector PIN NO.
  • Page 28 CN9 (IDE 2) : Secondary IDE Connector CN9 : IDE Interface Connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION RESET GROUND DATA 7 DATA 8 DATA 6 DATA 9 DATA 5 DATA 10 DATA 4 DATA 11 DATA 3 DATA 12 DATA 2 DATA 13 DATA 1...

  • Page 29: Ps/2 Power On/Off Control

    3.5 PS/2 Power ON/OFF Control The HS-6011 reserved a CN5 for ATX Power ON/OFF Control. CN5 : ATX Power ON/OFF Control DESCRIPTION Pin 1-2 OFF ( LOW ) Pin 1-2 ON ( HIGH ) Remain Power Status Change Power ON / OFF Standby 3.3V 3.6 Parallel Port Connector A standard 26-pin flat cable driver connector provides as CN12 with...

  • Page 30: The Floppy Disk Drive Connector

    3.7 The Floppy Disk Drive Connector A standard 34-pin header daisy-chain driver connector provides as CN16 with following pin assignment. Total two FDD drivers may connect. CN16 : FDD CONNECTOR PIN NO. DESCRIPTION PIN NO. DESCRIPTION GROUND REDUCE WRITE GROUND GROUND GROUND INDEX#...

  • Page 31: Serial Ports Connectors

    3.8 Serial Ports Connectors According to different configuration, the HS-6011, HS-6011V, HS-6011L and HS-6011P provides with different COM ports assignment. COM-1 RS-232 at external connector CN23 of all models. COM-2 RS-232 at external connector CN26 of HS-6011P. COM-1 RS-232 also at internal connector CN17 of all models.
  • Page 32 CN13 : RS422/485 PIN NO. DESCRIPTION PIN NO. DESCRIPTION RTS- RTS+ CTS+ CTS- The table here in show out on how to select and setting the COM-2 as RS-232 as CN26 or CN18, or RS-422/485 at CN13. Jumper RS-232 RS-422/485 JP11 3-5, 4-6 1-3, 2-4...

  • Page 33: Keyboard Connectors

    3.9 Keyboard Connectors The HS-6011 offers two possibilities for keyboard connections to external PS/2 type keyboard at CN27 and an internal 5-pin header at CN6. CN6 : 5-pin Header Keyboard Connector PIN NO. DESCRIPTION KEYBOARD CLOCK KEYBOARD DATA GROUND CN27 : 6-pin Mini-DIN Keyboard Connector PIN NO.

  • Page 34: Vga-Crt Connector

    3.11 VGA-CRT Connector The HS-6011 provides two possible connectives of VGA-CRT connections. One standard DB-15 external VGA connector as following CN25 pin information. Another internal 10-pin header for VRA-CRT connection as following CN19 pin information. CN25 : 15-pin DB-15 Female VGA-CRT connector PIN NO.

  • Page 35: Flat-Panel Connector

    3.12 Flat-Panel Connector The HS-6011 provides a 50-pin 2.0 mm pitch header connector (CN10) for 3.3Vor 5V Panel connection with following pin-assignment. +12V +12V * +3.3 or +5V PVcc ENAVdd FPVee SHFCLK ENABKL *PVcc default +5V...
  • Page 36 Flat Panel Display interface Mono Mono Mono Color Color Color Color Color Color Color Color Color Color STN-HR STN-SS STN-SS STN-DD STN-DD STN-DD 9/12/16 18/24 36-bit 18/24 8-bit 16-bit 8-bit 16-bit PIN# 8-bit 8-bit 16-bit 24-bit Name (4bP) (4bP) (4bP) (4bP) SHFCLK: Pixel clock .Shift Clock FLM.VSYNC: First line marker...

  • Page 37: Ir Connector

    3.13 IR Connector The HS-6011 provides a 6-pin internal IR communication connector as following CN21 pin information. CN21 : 6-PIN IR CONNECTOR PIN DESCRIPTION DESCRIPTION GROUND FIRRX IRTX IRRX CVROFF 3.14 USB Port Connector The HS-6011 provides a internal 8-pin header for two USB ports connection.

  • Page 38: Pc/104 Bus Connection

    3.15 PC/104 Bus Connection The HS-6011’s PC/104 expansion bus provides you in connect to all kind of PC/104 modules. The PC/104 bus has been already become the industrial embedded 16-bit PC standard bus. You can easily install to over thousands type of PC/104 modules from hundreds of venders in the world.
  • Page 39 CN14&CN15 : PC/104 Expansion Bus (CN14 = 64-pin female connector; CN15 = 40-pin female connector.) CN14 CN14 CN15 CN15 RowA RowB RowC RowD IOCHECK* SBHE* MEMCS16* RESETDRV LA23 IOSC16* LA22 IRQ10 IRQ9 LA21 IRQ11 LA20 IRQ12 DRQ2 LA19 IRQ15 -12V LA18 IRQ14 NOWS*...

  • Page 40: Fast Ethernet Connector

    3.16 Fast Ethernet Connector The Fast Ethernet controller provides with 32-bit performance, PCI bus master capability, and full compliance with IEEE 802.3 10/100Based-T specifications. For 10/100Base-T operation, please connect the network connection by plugging one end of the cable into the 9-pin RJ-45 CN22 Connector. CN22 : Ethernet Connector ( 9-pin RJ-45 ) PIN NO.

  • Page 41: Atx Power Controller Connector

    3.17 ATX Power Controller Connector The HS-6011 support ATX Power function by CN11. The connector of CN11 can control the 5 pin ATX Power via the extension cable from the Backplane (from the version 6.1).

  • Page 42: Award Bios Setup

    Chapter-4 AWARD BIOS Setup The HS-6011 uses the Award PCI/ISA BIOS for the system configuration. The Award BIOS setup program is designed to provide the maximum flexibility in configuring the system by offering various options which could be selected for end-user requirements. This chapter is written to assist you in the proper usage of these features.

  • Page 43: Main Menu

    4.1 Main Menu Once you enter the Award BIOS CMOS Setup Utility, the Main Menu will appear on the screen. The Main Menu allows you to select from several setup functions and two exit choices. Use the arrow keys to select among the items and press <Enter> to enter the sub-menu.

  • Page 44: Standard Cmos Setup

    4.2 Standard CMOS Setup The Standard Setup is used for the basic hardware system configuration. The main function is for Data/Time and Floppy/Hard Disk Drive settings. Please refer to the following screen for the setup. When the IDE hard disk drive you are using is larger than 528MB, please set the HDD mode to LBA mode.

  • Page 45: Bios Features Setup

    4.3 BIOS Features Setup This section allows you to configure your system for the basic operation. You have the opportunity to select the system’s default speed, boot-up sequence, keyboard operation, shadowing and security. ROM PCI／ISA BIOS <2A69KD2C> BIOS FEATURES SETUP AWARD SOFTWARE, INC.

  • Page 46: Chipset Features Setup

    4.4 Chipset Features Setup This section allows you to configure the system based on the specific features of the installed chipset. This chipset manages bus speeds and the access to the system memory resources, such as DRAM and the external cache. It also coordinates the communications between the conventional ISA and PCI buses.

  • Page 47: Integrated Peripherals

    4.5 Integrated Peripherals The IDE hard drive controllers can support up to two separate hard drives. These drives have a master/slave relationship which is determined by the cabling configuration used to attach them to the controller. Your system supports two IDE controllers--a primary and a secondary--so you can install up to four separate hard disks.

  • Page 48: Power Management Setup

    4.6 Power Management Setup The Power Management Setup allows user to configure the system for saving energy in a most effective way while operating in a manner consistent with his own style of computer use. ROM PCI-ISA BIOS <2A69KD2C> POWER MANAGEMENT SETUP AWARD SOFTWARE, INC.

This manual is also suitable for:

Hs-6011pHs-6011Hs-6011v

Table of Contents