Table of Contents
Advertisement
Quick Links
HS-6200/6600
BX Pentium
¡ E H alf Size¡ E A ll-in-one¡ E V GA CRT-LCD Interface¡ E
¡ E S upports DMA33¡ E W DT¡ E D OC¡ E L AN¡ E U SB¡ E I rDA¡ E
¡ E P ISA Bus Industrial Single Board Computer¡ E
HS-6200L/6600L
BX Pentium
¡ E H alf Size¡ E A ll-in-one¡ E
¡ E S upports DMA33¡ E W DT¡ E D OC¡ E L AN¡ E U SB¡ E I rDA¡ E
¡ E P ISA Bus Industrial Single Board Computer¡ E
HS-6200V/6600V
BX Pentium
¡ E H alf Size¡ E A ll-in-one¡ E V GA CRT-LCD Interface¡ E
¡ E S upports DMA33¡ E W DT¡ E D OC¡ E U SB¡ E I rDA¡ E
¡ E P ISA Bus Industrial Single Board Computer¡ E
HS-6200P/6600P
BX Pentium
¡ E H alf Size¡ E A ll-in-one¡ E
¡ E S upports DMA33¡ E W DT¡ E D OC¡ E U SB¡ E I rDA¡ E
¡ E P ISA Bus Industrial Single Board Computer¡ E
®
-II L/VGA LAN
®
-II LAN I.S.B.
®
-II L/VGA I.S.B.
®
-II I.S.B.
Advertisement
Table of Contents
Related Manuals for Boser HS-6200
Summary of Contents for Boser HS-6200
- Page 1 HS-6200/6600 ® BX Pentium -II L/VGA LAN ¡ E H alf Size¡ E A ll-in-one¡ E V GA CRT-LCD Interface¡ E ¡ E S upports DMA33¡ E W DT¡ E D OC¡ E L AN¡ E U SB¡ E I rDA¡ E ¡...
- Page 2 Intel Corporation. AWARD is a registered trademark of AWARD International Inc. ISB is a registered trademark of Boser Technology Co., Ltd. All other trademarks, products and or product's name mentioned herein are mentioned for identification purposes only, and may be trademarks and/or registered trademarks of their respective companies or owners.
-
Page 3: Table Of Contents
Contents HS-6200/6600 ..................1 HS-6200L/6600L ..................1 HS-6200V/6600V ...................1 HS-6200P/6600P ...................1 GENERAL INFORMATION .................3 1.1 M .................4 AJOR EATURES 1.2 S ..................5 PECIFICATIONS 1.3 D ................7 ELIVERY ACKAGE HARDWARE INSTALLATION..............8 2.1 C ............8 AUTION OF TATIC LECTRICITY 2.2 C ......9 AUTION ON... - Page 4 3.7 T ..........23 LOPPY RIVE ONNECTOR 3.8 S .............. 24 ERIAL ORTS ONNECTORS 3.9 K ..............25 EYBOARD ONNECTORS 3.10 PS/2 M -DIN C ........25 OUSE ONNECTOR 3.11 VGA CRT LCD C ..........26 ONNECTORS 3.12 IR C .................
-
Page 5: General Information
LCD Panel connection. The advanced ISA bus backplane system of HS-6200/6600 allows user could easily obtain one 16-bit ISA slot. The HS-6200/6600 provides with two pieces 168-pin DIMM sockets support up to 1GBytes of main system memory. -
Page 6: Major Features
1.1 Major Features ü ISA bus supported for HS-6200. PISA bus supported for HS-6600. ® ® ü One axial-horizontal type Slot-1 socket for Intel Pentium II 233 ¡ ã 6 50 MHz Processors. ® ü Intel 82443 BX chipset. ü... -
Page 7: Specifications
1.2 Specifications ® ® ² CPU: One piece Intel Pentium II 233/266/300/333/400/450/650 MHz. ² Bus interface: ISA bus ® ² Chipset: Intel 82443 BX with bus-100MHz frequency. ² Data bus: 64-bit ² Processing ability: 64-bit ® ² CRT-LCD SVGA Controller: INTEL 69000 chipset with on-chip 2MB memory supports CRT up to 1280x1024 256 colors. - Page 8 DMA33, WDT, DOC, USB and IrDA. (A version without LAN of HS- 6200/6600). The HS-6200/6600L provides with support DMA33, WDT, DOC, LAN, USB and IrDA. (A version without VGA CRT-LCD on-board of HS-6200/6600). The HS-6200/6600P provides with support DMA33, WDT, DOC, USB and IrDA.
-
Page 9: Delivery Package
1.3 Delivery Package The delivery package of HS-6200/6600 includes all following items: R PISA Bus supported.( HS-6200 ) R ISA Bus supported.( HS-6600 ) R One Printer Ports Bracketed Flat Cable R One COM Ports Bracketed Flat Cable R One IDE port Flat Cable... -
Page 10: Hardware Installation
Hardware Installation This chapter provides the information on how to install the hardware of HS-6200/6600. At first, please follow up sections 1.3, 2.1 and 2.2 in check the delivery package and carefully unpacking. Following after, the jumpers setting of switch, watchdog timer and the DiskOnChip™... -
Page 11: Caution On Unpacking And Before Installation
1.3, please check the delivery package again with following steps: 1. Unpacking the HS-6200/6600, keep well storage of all packing material, manual and diskette etc. if has. 2. Is there any components lose or drop from the board? DO NOT INSTALL IF HAPPENED. -
Page 12: Hs-6200/6600'S Layout
2.3 HS-6200/6600’s Layout HS-6200/6600’s Layout 2.4 Quick Listing of Jumpers ¡ X Frequency Multiplier setting of System Bus to JP1 ( 1-2,7-8 ON ) Processor Core ¡ X Manufacture Default Setting JP3 ( 1-2 OFF ) ¡ X Time scale of Watch-Dog Timer JP4 ( 5-6 ON ) ¡... -
Page 13: Quick Listing Of Connectors
2.5 Quick Listing of Connectors BZ1: ON-BOARD BUZZER CN1: FAN POWER CONNECTOR CN2: POWER 4-PIN CONNECTOR CN3: SPEAKER CONNECTOR CN4: KEYLOCK CONNECTOR CN5: PS/2 POWER SWITCH CONNECTOR CN6: 1st IDE CONNECTOR CN7: HDD LED CONNECTOR CN10: FDD CONNECTOR CN11: IR CONNECTOR (5-PIN) CN12: PARALLEL PORT CONNECTOR CN13: COM1 (HEADER 5x2) CN14: INTERNAL VGA LCD CONNECTOR (HEADER 25x2) -
Page 14: Jumper Setting Description
2.6 Jumper Setting Description A jumper pin-set is ON as a shorted circuit with a plastic cap inserted over two pins. A jumper pin-set is OFF as a open circuit with a plastic cap inserted over one or no pin(s) between pins. The below figure 2.2 shows the examples of different jumper pin-set setting as ON or OFF in this manual. -
Page 15: Manufacture Default Setting
Bus-Clock Frequency JP10 * 100MHz 66MHz 2.9 Frequency Multiplier Setting The HS-6200/6600 provides JP1 for define the selection of the Frequency Multiplier value of system bus to processor core in following table: Frequency Multiplier Setting of JP1: Frequency Multiplier: Bus-... - Page 16 ® Pentium II/III 350MHz processor.
-
Page 17: Setting The Rtc Configuration
2.10 Setting the RTC Configuration The HS-6200/6600 provides a setting for the selection of the RTC Clear Jumper by JP7 setting as following: CMOS Setting of JP7: CMOS Clear Jumper Normal * OFF Clear CMOS 2.11 System Memory DRAM The HS-6200/6600 provides a wide range on-board DRAM memory by two pieces DIMM sockets (DIMM-1, DIMM-2) request the access time should meet PC-100 standard. -
Page 18: Watch-Dog Timer
2.13 Watch-Dog Timer There are three access cycles of Watch-Dog Timer as Enable, Refresh and Disable. The Enable cycle should proceed by READ PORT 443H. The Disable cycle should proceed by READ PORT 043H. A continue Enable cycle after a first Enable cycle means Refresh. - Page 19 The Watch-dog timer is disabled after the system Power-On. The watch-dog timer can be enabled by a Enable cycle with reading the control port (443H), a Refresh cycle with reading the control port (443H) and a Disable cycle by reading the Watch-dog timer disable control port (043H).
-
Page 20: Pci Vga Controller
(D.O.C.) for avoid the mapping area with any other memory devices. If you have another extra memory devices in the system with the same memory, neither the HS-6200/6600 nor the extra memory devices will function normally. Please setting both at different memory address mapping. -
Page 21: Connection
This chapter gives all necessary information of the peripheral's connections, switches and indicators. 3.1 Power and FAN Connectors The HS-6200/6600 provides one 4-pin DC-Power connector as following CN2 pin information. And also provides one 3-pin fan out connector as following CN1 pin information. -
Page 22: Ide's Led, Key-Lock And Reset Button
PIN NO. DESCRIPTION EXTERNAL RESET GROUND 3.3 External Speaker The HS-6200/6600 has an on-board buzzer ( BZ1 ). And it also provides the CN3 in allows user to connecting to the external speaker. CN3 : Speaker Connector PIN NO. DESCRIPTION... -
Page 23: Pci E-Ide Drive Connector
3.4 PCI E-IDE Drive Connector One standard 40-pin header daisy-chain driver connector provides as CN6 with following pin assignment. Total two IDE (Integrated Device Electronics) drivers may connect. CN6(IDE 1) : Primary IDE Connector CN6 : IDE Interface Connector PIN NO. DESCRIPTION PIN NO. -
Page 24: Ps/2 Power On/Off Control
3.5 PS/2 Power ON/OFF Control The HS-6200/6600 reserved a CN5 for PS/2 Power ON/OFF Control. CN5 : PS/2 Power ON/OFF Control DESCRIPTION HIGH Switch Power OFF Switch Power ON 3.6 Parallel Port Connector A standard 26-pin flat cable driver connector provides as CN12 with following pin assignment for connection to parallel printer. -
Page 25: The Floppy Disk Drive Connector
3.7 The Floppy Disk Drive Connector A standard 34-pin header daisy-chain driver connector provides as CN10 with following pin assignment. Total two FDD drivers may connect. CN10 : FDD CONNECTOR PIN NO. DESCRIPTION PIN NO. DESCRIPTION GROUND REDUCE WRITE GROUND GROUND GROUND INDEX#... -
Page 26: Serial Ports Connectors
3.8 Serial Ports Connectors The HS-6200/6600 offers two high speed NS16C550 compatible UARTs with Read/Receive 16 byte FIFO serial ports with two internal 10-pin header. The HS-6200P/6600P which is with two external DB-9 connectors without VGA nor LAN on-board. All pin-... -
Page 27: Keyboard Connectors
CN20 : 6-pin Mini-DIN Keyboard Connector PIN NO. DESCRIPTION KEYBOARD DATA GROUND KEYBOARD CLOCK 3.10 PS/2 Mouse 6-pin Mini-DIN Connector The HS-6200/6600 provides an external PS/2 mouse connector at CN18 with following pin information. CN18 : PS/2 Mouse Connector PIN NO. DESCRIPTION DATA GROUND... -
Page 28: Vga Crt And Lcd Connectors
3.11 VGA CRT and LCD Connectors The HS-6200/6600 provides two possible connectives of VGA connections. One standard DB-15 external VGA connector as following CN19 pin information. Another internal 50-pin header for LCD Panel connection as following CN14 pin information. CN14 : 50-pin Internal LCD Panel Connector PIN NO. -
Page 29: Ir Connector
PIN NO. DESCRIPTION GREEN BLUE GROUND GROUND GROUND GROUND GROUND HSYNC VSYNC 3.12 IR Connector The HS-6200/6600 provides a 5-pin internal IR communication connector as following CN11 pin information. CN11 : 5-PIN IR CONNECTOR PIN NO. DESCRIPTION FIRRX IRRX GROUND IRTX... -
Page 30: Usb Ports Connector
3.13 USB Ports Connector The HS-6200/6600 provides two internal 8-pin USB ports connectors. Please refer to the following detail pin information. JP9 : 8-pin Header USB Connector PIN NO. PIN NO. BD0- BD1- BD0+ BD1+ GROUND GROUND 3.14 LAN Interface Connector The HS-6200/6600 provides one external RJ-45 100-based LAN interface connector. -
Page 31: Award Bios Setup
Chapter-4 AWARD BIOS Setup The HS-6200/6600 uses the Award PCI/ISA BIOS for the system configuration. The Award BIOS setup program is designed to provide the maximum flexibility in configuring the system by offering various options which could be selected for end-user requirements. -
Page 32: Main Menu
4.1 Main Menu Once you enter the Award BIOS CMOS Setup Utility, the Main Menu will appear on the screen. The Main Menu allows you to select from several setup functions and two exit choices. Use the arrow keys to select among the items and press <Enter> to enter the sub-menu. -
Page 33: Standard Cmos Setup
4.2 Standard CMOS Setup The Standard Setup is used for the basic hardware system configuration. The main function is for Data/Time and Floppy/Hard Disk Drive settings. Please refer to the following screen for the setup. When the IDE hard disk drive you are using is larger than 528MB, please set the HDD mode to LBA mode. -
Page 34: Bios Features Setup
4.3 BIOS Features Setup This section allows you to configure your system for the basic operation. You have the opportunity to select the system’s default speed, boot-up sequence, keyboard operation, shadowing and security. -
Page 35: Chipset Features Setup
4.4 Chipset Features Setup This section allows you to configure the system based on the specific features of the installed chipset. This chipset manages bus speeds and the access to the system memory resources, such as DRAM and the external cache. It also coordinates the communications between the conventional ISA and PCI buses. -
Page 36: Integrated Peripherals
4.5 Integrated Peripherals The IDE hard drive controllers can support up to two separate hard drives. These drives have a master/slave relationship which is determined by the cabling configuration used to attach them to the controller. Your system supports two IDE controllers--a primary and a secondary--so you can install up to four separate hard disks. -
Page 37: Power Management Setup
4.6 Power Management Setup The Power Management Setup allows user to configure the system for saving energy in a most effective way while operating in a manner consistent with his own style of computer use. -
Page 38: A Brief Information Of 10/100 Based-T Lan
Chapter-5 A Brief Information of 10/100 based-T LAN The HS-6200/6600 provides an on board 32-bit PCI 10/100 based-T ® Intel 82558B Ethernet LAN interface RJ-45 connection for easy using ® the HS-6200/6600 half size all-in-one Pentium VGA CRT-LCD interface with 100-based network industrial single board in connection to-with Novell NE2000 compatible LAN network system.