Integrated Peripherals - Boser HS-6300 Manual

4.5 Integrated Peripherals

The IDE hard drive controllers can support up to two separate hard
drives. These drives have a master/slave relationship which is
determined by the cabling configuration used to attach them to the
controller. Your system supports two IDE controllers--a primary and
a secondary--so you can install up to four separate hard disks.
PIO means Programmed Input /Output. Rather than having the
BIOS issue a series of commands to affect the transfer to or from the
disk drive, PIO allows the BIOS to tell the controller what it wants and
then let the controller and the CPU perform the complete task by
them. This is much simpler and more efficient (also faster).
ROM PCI/ISA BIOS (2A69KD2B)
IDE HDD Block Mode :
IDE Primary Master PIO :
IDE Primary Slave PIO :
IDE Secondary Master PIO :
IDE Secondary Slave PIO :
IDE Primary Master UDMA :
IDE Primary Slave UDMA :
IDE Secondary Master UDMA :
IDE Secondary Slave UDMA :
On Chip Primary PCI IDE :
On Chop Secondary PCI IDE :
USB Keyboard Support :
Init Display First :
Power On Function :
KB Power ON Password :
Hot Key Power ON :
KBC input clock :
On board FDC Controller :
Onboard Serial Port1 :
36
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
Enabled Onboard Serial Port 2
Auto UART Mode Select
Auto
Auto Onboard Parallel Port
Auto Parallel Port Mode
Auto
Auto
Auto LCD Panel Type
Auto
Enabled
Enabled
Disabled
PCI Slot ESC : Quit
F1 : Help
Any Key
F5 : Old Values
Enabled
F6 : Load BIOS Defaults
Ctrl-F1
F7 : Load Setup Defaults
8 MHz
Enabled
3F8/IRQ4
: 2F8/IRQ3
: Normal
: 378/IRQ7
: SPP
: Panel5
: Select Item
PU/PD/+/-: Modify
(Shift) F2 : Color