Integrated Peripherals - Boser HS-7002 Manual

4.7

Integrated Peripherals

The IDE hard drive controllers can support up to two separate hard
drives. These drives have a master/slave relationship that is
determined by the cabling configuration used to attach them to the
controller. Your system supports two IDE controllers--a primary
and a secondary--so you can install up to four separate hard disks.
PIO means Programmed Input/Output. Rather than having the
BIOS issue a series of commands to affect the transfer to or from
the disk drive, PIO allows the BIOS to tell the controller what it
wants and then let the controller and the CPU perform the
complete task by them. This is much simpler and more efficient
(also faster).
Phoenix – AwardBIOS CMOS Setup Utility
OnChip IDE Device
Onboard Device
SuperIO Device
: Select Item + / - /PU/PD: Value
F5: Previous Values
Phoenix – AwardBIOS CMOS Setup Utility
IDE HDD Block Mode
On-Chip Primary PCI IDE
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Primary Master UDMA
IDE Primary Slave UDMA
On-Chip Secondary PCI IDE
IDE Secondary Master PIO
IDE Secondary Slave PIO
IDE Secondary Master UDMA
IDE Secondary Slave UDMA
*** On-Chip Serial ATA Setting ***
On-Chip Serial ATA
Serial ATA Port0 Mode
Serial ATA Port1 Mode
: Select Item + / - /PU/PD: Value
F5: Previous Values
Integrated Peripherals
[Press Enter]
[Press Enter]
[Press Enter]
F10: Save
F6: Fail-Safe Defaults F7: Optimized Defaults
OnChip IDE Device
[Enabled]
[Enabled]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Primary Master]
[Primary Master]
F10: Save
F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level
ESC: Quit F1: General Help
Item Help
Menu Level
ESC: Quit F1: General Help
33