General Information - Boser HS-6011L Manual

Chapter-1

General Information

The HS-6011 is a bus-100MHz Intel
®
Pentium II-III-Celeron Industrial Single Board (I.S.B.) CPU card with features
combine together to make it an ideal all-in-one industrial single board computer,
enhanced I/O effects with VGA interface supports LCD Display panel and CRT
Monitor on-board.
The HS-6011 also provides one set of PC/104 bus for 8/16-bit industrial
application with based on PC/104 standard bus.
With onboard DMA33 of mode 4 to IDE drive interface architecture, the HS-6011
supports with maximum 33.3 MB/sec in data transfer rating to 4 pieces IDE drive
connection. Design with Intel
HS-6011 supports all series Pentium
®
The on-board C&T 69000 VGA chipset supports up to 1280 x 1024 256 colors
display resolution with on-chip 2MBytes memory, and it provides both VGA CRT
Monitor and LCD Panel display connection.
The advanced PICMG bus add-on connection of HS-6011 allows user could
easily obtain both ISA's 16-bit and PCI's 32-bit full set signals from a full size
PICMG slot for suitable plug into system with 8/16/32-bit ISA and-or PCI slots
operating. The HS-6011 provides with two pieces 168-pin DIMM sockets support
up to 1.0GBytes of main system memory.
A single Flash chip holds the system BIOS, and you can easy update the Flash
BIOS by the Utility Update. Advanced USB and IR ports also provide for faster
and easily in data transmission. You can also use the DOS version of the
"DiskOnChip" socket by issuing commands from the DOS prompt without the
necessity of other software supports up to 144MB.
If a non-expect program cause halts, the onboard WDT Watch-Dog Timer will
automatically reset the CPU or generate an interrupt. The watchdog is designed
with hardware only and doesn't need any arithmetical functions of a real-time
clock chip. This ensures the reliability in an unmanned or standalone system.
®
BX chipset design PICMG bus
®
82443BX and 82371EB core logic chipset, the
®
II-III-Celeron operating at 233 ~ 650MHz.
3