Table of Contents
Advertisement
2.13 PCI VGA Controller
The HS-6011 has built-in a C&T 69000 VGA Controller with on-chip
2 MB memory, support resolutions up to 1280 x 1024 256 colors to
VGA-CRT monitor. The HS-6011 also provides one 50-pin internal
LCD Panel connector CN10, and reserved internal 10-pin
VGA-CRT header connector.
2.14 DiskOnChip Address Setting
The HS-6011 provides a U24 socket for install the DiskOnChip
module.
A JP10 ( pin 1-2, 3-4 ) may select the starting memory address of
the DiskOnChip (D.O.C.) for avoid the mapping area with any
other memory devices. If you have another extra memory devices in
the system with the same memory, neither the HS-6011 nor the
extra memory devices will function normally. Please setting both at
different memory address mapping.
JP10 : DiskOnChip Address
Memory Address Mapping JP10 3-4 JP10 1-2
D000
D800
*) : default setting
The D.O.C. function allows the system in using without FDD nor
HDD. The D.O.C. may formatting as driver C: or driver A:. User may
also easily uses the DOS's commands such as FORMAT, SYS,
COPY, XCOPY, DISCOPY and DISKCOMP etc. This is means that
the D.O.C. may uses as driver-A if the system without FDD-A for
ambient application. Please contact with your supplier for different
size D.O.C. module.
* ON
ON
E000
OFF
E800
OFF
* ON
OFF
ON
OFF
19
Advertisement
Table of Contents
