Integrated Peripherals - Boser HS-6301 Manual

4.5 Integrated Peripherals

The IDE hard drive controllers support up to two separate hard drives.
These drives have a master/slave relationship determined by the
cabling configuration. Your system supports two IDE controllers--a
primary and a secondary— so you can install up to four separate hard
disks.
PIO means Programmed Input /Output. Rather than having the BIOS
issue a series of commands to affect the transfer to or from the disk
drive, PIO allows the BIOS to tell the controller what it wants and then
let the controller and the CPU perform the complete task by them.
This is much simpler and more efficient (also faster).
IDE HDD Block Mode
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Secondary Master PIO
IDE Secondary Slave PIO
IDE Primary Master UDMA
IDE Primary Slave UDMA
IDE Secondary Master UDMA : Auto
IDE Secondary Slave UDMA
On-Chip Primary PCI IDE
On-Chip Secondary PCI IDE
USB Keyboard Support
Init Display First
Power On Function
KBC input clock
On board FDC Controller
Onboard Serial Port1
42
ROM PCI/ISA BIOS (2A69KD2A)
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
: Enabled
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
: Enabled
: Enabled
: Enabled
: PCI Slot
: BUTTOM Only
: 8 MHz
: Enabled
: 3F8/IRQ4
Onboard Serial Port 2 : 2F8/IRQ3
UART Mode Select
Onboard Parallel Port : 378/IRQ7
Parallel Port Mode
ESC : Quit
F1 : Help
F5 : Old Values (Shift) F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
: Normal
: SPP
????: Select Item
PU/PD/+/-: Modify