Integrated Peripherals - Boser HS-7280 Manual

4.7

Integrated Peripherals

This section provides more peripheral devices setting including
IDE/SATA storage devices, COM ports, USB controller, audio function,
and special power on control.
Phoenix - AwardBIOS CMOS Setup Utility
OnChip IDE Device
Onboard Device
SuperIO Device
Onboard Lan Boot ROM
Watch Dog Timer Select
Onboard Serial Port 3
Serial Port 3 Use IRQ
Onboard Serial Port 4
Serial Port 4 Use IRQ
USB Device Setting
↑↓← →: Select Item +/-/PU/PD: Value
F5: Previous Values
The IDE hard drive controllers can support up to two separate hard
drives. These drives have a master/slave relationship that is
determined by the cabling configuration used to attach them to the
controller. HS-7280 supports one IDE controllers – a primary and a
secondary – so you can install up to two separate hard disks. HS-7280
also provides two SATA ports.
34
Integrated Peripherals
[Press Enter]
[Press Enter]
[Press Enter]
[Disable]
[Disabled]
[280]
[IRQ10]
[288]
[IRQ10]
[Press Enter]
F10: Save
F6: Fail-Safe Defaults
Item Help
Esc: Quit F1: General Help
F7: Optimized Defaults