Sleep Timer [Slp] - Canton Smart Amp 5.1 Manual

Sleep Timer [SLP]

If this function is enabled, the system shuts down to standby mode after a specified time. You can select 15, 30, 45 or 60 Minutes.
If the value OFF is selected, the function is disabled.
To adjust the shut down time, please follow the next steps:
To enter the menu, press the "M" button.
1
Use the " " or " " button to navigate to the menu System Setup [SYS] and confirm with the "OK" button.
2
Confirm the first menu item Sleep Timer [SLP] by pressing the "OK" button.
3
Select the desired time using the + or – keys.
4
Press the "M" button to exit this menu item.
5
Note: The Sleep Timer will be disabled automatically after a power down. That means the shut down time must be selected again after
every power up sequence in order to use this function.
IR Menu [IRM]
This menu includes all functions relevant for the infrared operation of the amplifier. It consists of three submenus.
IR Learn [IRL]
The system can learn the infrared codes of your TV remote control and therefore allows you to control the functions of the amplifier and
your TV via one remote control. You can allocate any key of the TV remote control to your Amp 5.1. When choosing a key, make sure
that the instructions for the amplifier do not conflict with the TV. We recommend that you deactivate the internal loudspeakers of the TV
once the amplifier is connected. Then you can use the volume keys for the Amp 5.1.
To learn the IR codes of a third party remote please do the following steps:
To enter the menu, press the "M" button.
1
Use the " " or " " button to navigate to the menu System Setup [SYS] and confirm with the "OK" button.
2
Select the IR Menu [IRM] by using the
3
Confirm the first menu item Sleep Timer [SLP] with the "OK" button. Please press key you want to learn" appears on the screen, the
4
display flashes [IRL].
Please press the desired function on the Canton Smart remote control.
5
Note: The IR codes of a TV remote can be assigned to all buttons of the optionally available Canton Smart remote alike.
" " or " " buttons and press the "OK" button to confirm.
English
3 9 9