Canton Smart Amp 5.1 Manual page 38

3D Audio [3D]
With this option you can adjust the intensity of the virtualizer and the virtual Dolby Atmos
Starting from default setting Normal [NOR] you can increase the effect High [HIG] or decrease the effect Low [LOW].
To adjust the setting, please to as follows:
To enter the menu, press the "M" button.
1
Use the " " or " " button to navigate to the menu System Setup [SYS] and confirm with the "OK" button.
2
Use the " " or " " button to select the menu item 3D Audio [3D] and confirm with the "OK" button.
3
Select the desired intensity using the "+" resp. the "–" key.
4
Confirm and exit the menu item by pressing the "M" button.
5
Display Setup [UI]
The menu Display Setup includes all functions for the display in the front and the On-Screen menu.
Language [LAN]
With this option you can change the On-Screen menu (OSD) language from German to English and backwards.
To change the language please proceed as follows:
To enter the menu, press the "M" button.
1
Use the " " or " " button to navigate to the menu System Setup [SYS] and confirm with the "OK" button.
2
Use the " " or " " button to select the menu Display Setup [UI] and confirm with the "OK" button.
3
Use the " " or " " button to select the menu item Language [LAN] and confirm with the "OK" button.
4
Use the "+" resp. the "–" key to select the desired language.
5
Confirm and exit the menu item by pressing the "M" button.
6
LED Flashing [LED]
With this option you can deactivate the flashing of the green LED in the front to indicate the missing network setup and turn the red and
green LED on permanentely instead.
To change the missing network indication please proceed as follows:
effect to your personal taste.
®
English
3 1 07