System Setup [Sys]; Sleep Timer [Slp] - Canton Smart Connect 5.1 Operating Instructions Manual

English

2. System Setup [SYS]

The second item in the main menu is the System Setup. It contains the following menu items:
•Sleep Timer
•IR Menu
–IR Learn
–Direct Input Learn [DIL]
–IR Clear
•HDMI CEC
•Standby Mode
•Input Config
•Analog Gain
•Input Select
•Lipsync
•Max Volume
•Playmode
•3D Audio
•Display Setup
–Language
–LED Flashing
•Factory Reset

Sleep Timer [SLP]

If this function is enabled, the Connect 5.1 shuts down to standby mode after a specified time. You can select 15 [15M], 30 [30M], 45 [45M]
or 60 Minutes [60M]. If the value [OFF] is selected, the function is disabled.
To adjust the shut down time, please follow the next steps:
To enter the menu, press and hold the input select key "
1
Use the "+" resp. the "–" key to select the menu item System Setup [SYS] and confirm with the "Play/Pause" button " ".
2
Confirm the first menu item Sleep Timer [SLP] with the "Play/Pause" button " ".
3
Select the desired time using the "+" or "–" keys.
4
Confirm and exit the menu item by pressing the Input-button "
5
102
[SLP]
[IRM]
[IRL]
[RES]
[CEC]
[STB]
[INP]
[OFS]
[SEL]
[LIP]
[VOL]
[PLM]
[3D]
[UI]
[LAN]
[LED]
[RES]
" for at least 3 seconds.
".