Canton Smart Amp 5.1 Manual page 58

Problem Possible cause
The input [BT] cannot 1. The function BT Select [BTS] is activated and the
be selected via the Amp 5.1 switches the source automatically as soon
"Input" buttons " " as a signal from your (mobile) device is received.
or " ".
The Amp 5.1 does not 1. The function BT Select [BTS] is deactivated
automatically switch
(Manual / [MAN]).
to the input [BT].
2. Bluetooth
3. The Amp 5.1 is connected to
another (mobile) device.
4. The (mobile) device is not paired to the
Amp 5.1.
No playback or inter- 1. There is no connection between the Amp 5.1
rupted playback via
and the (mobile) device.
Bluetooth wireless
®
2. The (mobile) device is paired,
technology
but it does not play.
3. You are out of reach of the Amp 5.1. The maxi-
mal distance is approx. 10m.
® is disabled on your (mobile) device.
Solution
1. Deactivate the function BT Select [BTS] in order to select the
input [BT] manually.
1. Activate the function BT Select [BTS].
2. Activate Bluetooth ® technology on your (mobile) device.
3. Disable Bluetooth wireless technology on the other (mobile)
®
device.
4. Pair your (mobile) device with the Amp 5.1.
1. Pair and connect your (mobile) device with the Amp 5.1 as
described in this manual.
2.1 The (mobile) device needs to be reconnected.
2.2 Increase the volume at the (mobile) device (to the
maximum possible value).
2.3 Increase the volume of the Amp 5.1.
2.4 Make sure that sources of interference, such as a
WiFi Router or a laptop, are not placed in close proximity
to the Amp 5.1.
2.5 Simultaneous operation via WiFi and Bluetooth
connection from a (mobile) device is not possible
without interference in some cases; therefore, disable
WiFi on the (mobile) device.
3. Reduce the distance between the Amp 5.1
and the (mobile) device to below 10m.
English
®
3 1 27