Google Assistant - Canton Smart Amp 5.1 Manual

Hide thumbs Also See for Smart Amp 5.1:

Table of Contents

the app that you have heard the melody.

Now, please select the "room" where you will use the amplifier (e.g. family room) and confirm with "next".

Please select the WiFi network (WLAN) which you want to use for the Amp 5.1 and click on "next".

The "Google Home app" and the Amp 5.1 will now be connected. After a successful connection the display of the Amp 5.1 shows [WIF]

followed by [CON] for 5 seconds.

Now the installation is almost finished. Please follow the last steps on your (mobile) device to fully complete the installation.

To play music using Chromecast built-in, open an app that supports this feature (Spotify, TuneIn, etc.). This is indicated by the Chromecast

built-in icon on the screen. Depending on the app, it may be necessary to start playback (the stream) first so that this function is displayed

and available.

In order to play back music that you have stored locally on your (mobile) device via the Smart Amp 5.1 using Chromecast built-in, you can

use the manufacturer's own playback app. If the music app of the manufacturer does not support Chromecast built-in, you can

alternatively use a freely available app (such as the app "AllCast" from ClockworkMod).

Google Assistant

You can operate the Smart Amp 5.1 in two ways with the „Google Assistant".

Connecting to a Google Home device.

Using the integrated voice control of the Google Home app.

Further information can be found under: www.assistant.google.de

Note:

Google Assistant is not available in certain languages and countries.

English

3 8 7

Table of Contents