Canton Smart Amp 5.1 Manual page 52

If the speaker pairing failed and "Wireless pairing failed" is shown in the info bar on top of the menu please repeat steps 7 to 10
Notes:
and verify that...
a) ...the selected Smart speaker has been disconnected from the mains for at least 30 seconds.
b) ...not more then 20 seconds have been passed between pressing the "OK" button and switching the speaker on.
c) ...the distance between the Amp 5.1 and the speaker may not exceed 10m and they are in the same room.
Please increase the transmission power of the wireless audio module described in chapter Transmission Power [TXP] if neccessary.
6. System Info [INF]
The fifth menu item of the Main Menu is the System Info. It contains the following items:
• Firmware Info
– WiFi
– Google Cast
– STS Wireless
– MCU Host
– DSP Audio
– OSD Fonts
• Network Info
– IP Address
– MAC Address
– Name
– SSID
– WiFi Band
– STS Wireless
[FWI]
[WIF]
[GC]
[STS]
[MCU]
[DSP]
[OSD]
[NWI]
[IP]
[MAC]
[NAM]
[SSI]
[BAN]
[WCH]
English
3 1 21