Canton Smart Amp 5.1 Manual page 42

4. Wireless Setup [WIS]
The fourth item of the Main menu is the Wireless Setup. In this menu you can perform settings on the wireless audio module (which is used to
transmit audio signals wirelessly to Smart speakers) and the Bluetooth
• Bluetooth [BT]
– BT Pairing [BTP]
– BT Select [BTS]
– Autoplay [ATP]
– Bluetooth Reset [BRE]
• Transmission Power [TXP]
• RF Channel [CHN]
• Wireless Reset [WRE]
Bluetooth [BT]
®
In this menu you can set all features relating to the Bluetooth
Bluetooth menu includes four submenus, as follows:
Pair Mode [BTP]
This menu allows you to set whether the Amp 5.1 sends a pairing request to (mobile) devices permanently [AUT], or whether this function
is disabled [MAN] to avoid unwanted pairing processes with (mobile) devices. If you deactivate this function a pairing request can only
be send manually using the Smart remote with the "Bluetooth Pairing" button. As factory setting this function is activated [AUT] to allow
the pairing of (mobile) devices without the Smart remote. If you deactivate [MAN] this function you need to activate the function again in
order to be able to pair additional (mobile) devices (or you need to use the Smart remote).
To change the setting please proceed as follows:
To enter the menu, press the "M" button.
1
Use the " " or " " button to select the menu item Wireless Setup [WIS] and confirm with the "OK" button.
2
Select the first menu item Bluetooth [BT] and confirm with the "OK" button.
3
Confirm the menu item BT Pairing [BTP] and confirm with the "OK" button.
4
Use the "+" resp. the "–" key to select the desired connection type Manual [MAN] or Auto [AUT]:
5
[AUT] = The Amp 5.1 send pairing requests permanently.
wireless technology. It contains the items:
®
wireless technology module integrated in the Smart Amp 5.1. The
®
English
3 1 11