Canton Smart Amp 5.1 Manual page 43

English
[MAN] = The pairing process needs to be initiated by pressing the "Bluetooth Pairing" button on the Smart remote.
Exit the menu item by pressing the "M" button.
6
Notes: •If a signal is being transmitted via Bluetooth
bile) device, even if Auto [AUT] is selected.
•If the input Bluetooth [BT] is not selected, neither automatic nor manual pairing is possible. To achieve pairing independent of the
selected input, the BT Select [BTS] function must be set to automatic.
•For the requirements for a successful pairing process, please see chapter "Playback via Bluetooth® wireless technology".
BT Select [BTS]
If this function is set to Auto [AUT], the Amp 5.1 automatically switches to the Bluetooth [BT] input whenever it detects an audio signal
from the (mobile) device. If this function is deactivated and set to Manual [MAN] (factory setting), the input must be selected manually.
To activate / deactivate this function please proceed as follows:
To enter the menu, press the "M" button.
1
Use the " " or " " button to select the menu item Wireless Setup [WIS] and confirm with the "OK" button.
2
Select the first menu item Bluetooth [BT] and confirm with the "OK" button.
3
Use the " " or " " button to select the menu item BT Select [BTS] and confirm with the "OK" button.
4
Use the "+" resp. the "–" key to select the desired connection type Auto [AUT] or Manual [MAN]:
5
Confirm and exit the menu item by pressing the "M" button.
6
Notes: •Depending on the (mobile) device with this function set to Auto [AUT] the Amp 5.1 may also switch to the input [BT] when
typing a message or when other system sounds occur. A time delay of 5 seconds is programmed to avoid continuous switching
(e.g. on arrival of a message).
•If the BT Select function is activated [AUT], the input [BT] cannot be selected using the
mode, the Amp 5.1 can be paired with the (mobile) device at any time, regardless of the selected signal input.
AutoPlay [APL]
If this function is activated [ON], the playback of a previously connected device with Bluetooth® wireless technology will start
automatically when the Amp 5.1 is switched on. This starts playback of the mediaplayer app recently used on the (mobile) device.
112
wireless technology, the Amp 5.1 does not send a pairing request to a second (mo-
®
" " or " " buttons any longer. In this