Google Assistant - Canton Smart Connect 5.1 Operating Instructions Manual

Hide thumbs Also See for Smart Connect 5.1:

Table of Contents

English

Please confirm that you have heard the melody.

Now, please select the "room" where you will use the pre-amplifier (e.g. family room) and confirm with "next".

Please select the WiFi network (WLAN) which you want to use for the Connect 5.1 and click on "next".

The "Google Home app" and the Connect 5.1 will now be connected. After a successful connection the display of the Connect 5.1 shows

[WIF] followed by [CON] for 5 seconds.

Now the installation is almost finished. Please follow the last steps on your (mobile) device to fully complete the installation.

To play music using Chromecast built-in, open an app that supports this feature (Spotify, TuneIn, etc.). This is indicated by the Chromecast

built-in icon on the screen. Depending on the app, it may be necessary to start playback (the stream) first so that this function is displayed

and available.

In order to play back music that you have stored locally on your (mobile) device via the Smart Connect 5.1 using Chromecast built-in, you

can use the manufacturer's own playback app. If the music app of the manufacturer does not support Chromecast built-in for audio, you

can alternatively use a freely available app (such as the app "AllCast" from ClockworkMod).

Google Assistant

You can operate the Smart Connect 5.1 in two ways with the „Google Assistant".

Connecting to a Google Home device.

Using the integrated voice control of the Google Home app.

Further information can be found under: www.assistant.google.de

Note:

Google Assistant is not available in certain languages and countries.

Table of Contents