1.4 Vibration levels
5. Steer, brake, accelerate, shift gears (for wheeled machines),
and move the attachment levers and pedals slowly so that
the machine moves smoothly
6. Adjust the machine speed and travel path to minimize the
vibration level
When pushing with bucket or blade, avoid sudden load-
ing; load gradually
Drive around obstacles and rough terrain conditions
Slow down when it is necessary to go over rough terrain
Make the curve radius of traveling path as large as pos-
sible
Travel at low speed when traveling around sharp curves
7. Minimize vibrations for long work cycle or long distance trav-
eling
Reduce speed to prevent bounce
Transport machines long distances between worksites
8. The following guidelines can be effective to minimize risks of
low back pain
Operate the machine only when you are in good health.
Provide breaks to reduce long periods of sitting in the
same posture
Do not jump down from the cab or machine
Do not repeatedly handle and lift loads
1-6
Foreword
PW180-7E0 – VEAM400102