Table of Contents
Advertisement
3.24 Transportation
When loading or unloading the machine with the automatic
warming-up operation mode, if the automatic mode is
released, the speed may change suddenly. Avoid loading or
unloading during automatic warming-up operation.
When loading or unloading, always use ramps or a platform and
carry out the operations as follows.
1. Properly apply the brakes on the trailer and insert blocks (2)
beneath the tyres to ensure that it does not move. Then fix
the ramps in line with the centres of the trailer and the
machine. Be sure that the two sides are at the same level as
one another.
Make the angle of the ramps (3) a maximum of 15°.
Set the distance between the ramps (A) to match the centre
of the wheels.
2. Set the travel speed switch to the Creep position.
For details, see "Creep speed selector switch (3-27)".
3. Turn the auto-deceleration switch OFF, and return the fuel
control dial (6) to reduce the engine speed.
For details, see "Auto-deceleration switch (3-35)".
4. Turn the swing lock switch (10) ON to apply the swing lock.
3-152
3
1
Max. 15°
A
6
GK018166
ON
10
OFF
Operation
2
GK018339
MIN
GK018297
PW180-7E0 – VEAM400102
Advertisement
Table of Contents
