Table of Contents
Advertisement
Safety
WARNING: For reasons of safety, always follow these safety precautions
6. Warning for hot objects (20E-00-K1190)
Warning for high temperature coolant and oil, hot water and
oil hazard.
To prevent hot water and oil from spurting out:
Turn engine off.
Allow water to cool.
Slowly loosen cap to relieve pressure before removing.
Read operation manual before operation.
7. Safety lock. This is located on the right hand window of the
machine. (20K-00-31181)
Read operation manual before operation.
With safety lock lever raised the control levers and ped-
als are disabled.
With safety lock lever lowered and control lever lock
switch on the machine can travel.
With safety lock lever lowered and control lever lock
switch off work equipment and travel can be operated.
REMARK
In certain conditions it may be possible for the safety lock
lever to contact the left hand arm rest on the operator seat.
To avoid this, always ensure that the left hand arm rest is
stowed in the fully up position before operating the safety
lock lever.
8. Warning for staying clear. This is fitted on both sides of arm.
(20E-00-K1140)
Keeping out of moving area.
To prevent SEVERE INJURY or DEATH.
Do the following before moving the machine or its attach-
ments:
Sound horn to alert people nearby.
Be sure no one is on or near machine or in the swing
area.
Rotate cab for full view of travel path if it can be done
safely.
Use spotter if view is obstructed. Follow above even if
machine equipped with travel alarm and mirrors.
PW180-7E0 – VEAM400102
2.4 Position for attaching safety labels
2-39
Advertisement
Table of Contents
