Table of Contents
Advertisement
3.24 Transportation
6. The length off the wire rope and the lifting angle must be as
shown in the figure on the right.
7. When lifting, make sure that there is no change in the posi-
tion due to possible leakage in the hydraulic circuit on the
boom cylinder head side.
8. When the machine leaves the ground, stop lifting and check
that the machine is balanced.
Then lift the machine slowly.
3-158
1.1 m
or more
PW180-7E0 – VEAM400102
Operation
3.0 m
or more
Advertisement
Table of Contents
