3.24 Transportation
8. Raise the work equipment, pull in the arm under the boom,
then move the machine slowly.
9. When the machine is horizontal on the top of the rear wheels
of the trailer, stop the machine.
10. When moving from the rear of the trailer on to the ramps, set
the angle of the arm and boom to 90° - 110°, lower the
bucket to the ground, then move the machine slowly.
11. When moving down the ramps, operate the boom and arm
slowly to lower the machine carefully ubtil it is completely off
the ramps.
3-156
Operation
90°~110°
GK018346
PW180-7E0 – VEAM400102