Table of Contents
Advertisement
Operation
Direction indicator switch
This switch (21) is used to indicate the driver's intention to
change direction.
1.
Turn right: push lever fully forward
2.
Turn left: pull lever fully back
(direction indicator (a) to the rear of the steering wheel
hub will flash)
The indicator cancel automatically, but can be cancelled manu-
ally by returning return lever to neutral position.
Horn switch
When the button at the tip of the steering column stalk (21a) is
pressed the horn will sound.
REMARK
Additional horn switch is switch (34).
Windscreen wash switch
When the sleeve switch on the steering column stalk (21b) is
pushed towards the steering column the windscreen wash will
operate.
Roadlights dip/main beam/flash switch
This switch (21c) has two functions.
To alternate between headlight dipped and main beams. For
main beam push steering column stalk fully downwards.
(Note road lights switch (24) must be at position (2) for this
function), to return to headlights dipped push steering col-
umn stalk fully downwards.
Main beam indicator (23) will illuminate when main beam
headlights are illuminated.
To flash headlights pull steering column stalk fully upwards
and release.
PW180-7E0 – VEAM400102
21
1
2
21a
21b
21c
Flash
Dip
Main
3.4 Switches
22
23
3-51
Advertisement
Table of Contents
