Table of Contents
Advertisement
3.3 Basic check items
1. Working mode selector switch (basic switch)
This switch (1) is used to set the power and movement of the
work equipment.
Operations can be carried out more easily by selecting the mode
to match the type of operation.
P mode:
For heavy-load operations
E mode:
For operations with emphasis on fuel economy
L mode:
For fine-control operations and lifting
B mode:
For breaker operations
When the engine is started, the working mode is set auto-
matically to P mode. When the switch is pressed, the system
will scroll through each mode in turn. The display on the
monitor display portion changes for each mode.
If you require a default setting other than "P mode" please
consult your KOMATSU distributor or dealership to have the
setting amended.
REMARK
When the mode selector switch is pressed, the mode is dis-
played in the centre of the monitor display, and the screen
returns to the normal screen after 2 seconds. (The diagram on
the right is an example of the display for the P mode.)
WARNING
When using the breaker, do not use P mode. There is danger
that the breaker may be damaged.
3-26
GK018148
Monitor display portion
Monitor display portion
2 seconds
PW180-7E0 – VEAM400102
Operation
Advertisement
Table of Contents
