3.3 Basic check items
When the working mode is P or E
1. Press select switch (5) and the normal screen on the monitor
display changes to the screen shown in the diagram on the
right.
2. Select 01 from the screen and the monitor display changes
to the flow setting screen shown on the right (Full flow). By
pressing down switch (13) the flow can be reduced.
OR
Select 02 from screen and the monitor display changes to
the flow setting on the right. Press up switch (14) or down
switch (13) to adjust to the desired flow.
3. After completing the flow setting, press input confirmation
switch (12).
The monitor display will return to the normal screen.
REMARK
The flow can be adjusted for the attachment installed.
3-30
Operation
PW180-7E0 – VEAM400102