Table of Contents
Advertisement
4.11 Maintenance procedure
When required
Outer Element – Clean
1. Open the door at the left side of the machine, remove 3
hooks (2), then remove cover (6).
NOTE
Before and after cleaning the element, do not leave or keep
it in direct sunlight.
2. Hold the outer element, rock it lightly up and down and to the
left and right, and rotate the element to the left and right to
pull it out.
NOTE
Never remove the inner element. It will allow dirt to enter and
cause failure of the engine.
Do not use a screwdriver or other tool.
3. After removing the outer element, cover the air connector
inside the air cleaner body with a clean cloth or tape to pre-
vent dirt or dust from entering.
4. Wipe off or brush off the dirt stuck to cover (6) and the inside
of the air cleaner body.
4-34
Inner element
Outer element
Air cleaner body
Cover
PW180-7E0 – VEAM400102
Maintenance
6
2
GK018377
GK018379
GK018380
GK018381
Advertisement
Table of Contents
