Table of Contents
Advertisement
Operation
5. If the machine is equipped with work equipment, set the
work equipment at the front and travel forward to load it; if it
has no work equipment, travel in reverse
6. Align the direction of travel with the ramps and travel slowly.
Lower the work equipment as far as possible without caus-
ing interference.
When on the ramps, operate only the travel lever. Do not
operate any other lever or pedal.
7. When the machine travels over the rear wheels of the trailer,
it becomes unstable, so drive slowly and carefully. (Never
operate the steering)
8. At the moment the machine passes the rear wheels, it tilts
forward, so be careful not to let the work equipment hit the
trailer body. Drive the machine forward to the specified posi-
tion, then stop the machine.
9. Turn the swing lock switch OFF to cancel the swing lock
then swing the upper structure slowly 180°.
10. Stop the machine at the specified position on the trailer.
11. Turn the swing lock switch ON to lock the swing lock.
When the swing lock switch is turned ON, display monitor (3)
lights up.
PW180-7E0 – VEAM400102
3.24 Transportation
90°~110°
GK018341
Max. 15°
GK018342
GK018343
3-153
Advertisement
Table of Contents
