Table of Contents
Advertisement
Operation
5. After carrying out the warming-up operation, check that each
gauge and monitor lamp is in the following condition.
Engine water temperature gauge (1): Inside black range
Fuel gauge (2): Inside green range
Engine water temperature monitor (3): green
Radiator water level monitor (4): off
Engine oil pressure monitor (5): off
Charge level monitor (6): off
Fuel level monitor (7): green
Air cleaner clogging monitor (8): off
Engine pre-heating lamp (9): off
Engine oil level monitor (10): off
Hydraulic oil temperature (11): green
Hydraulic oil temperature gauge (12):inside black range
Replacement monitor of engine oil: off (13)
6. Check that there is no abnormal exhaust gas colour, noise,
or vibration. If any abnormality is found, repair it.
7. Press power mode select on the monitor panel until the lamp
of the mode to be used lights up.
PW180-7E0 – VEAM400102
4
1
3
12
11
10
8
13
3.23 Operation
2
5
7
9
6
3-117
Advertisement
Table of Contents
