Reset Configuration; Change Brightness Intensity - Rice Lake LaserLight3 Series Technical Manual

LaserLight3 Remote Display
3.4.6

Reset Configuration

Select DfltCfg in the Setup menu to reset the LaserLight3 configuration.
Version
Remote
1. Navigate to Setup ▼ Comm ► ... ► DfltCfg.
. No displays.
2. Press
. Yes displays.
3. Press
4. Press or
5. Press to exit the menu.
3.4.7

Change Brightness Intensity

To change brightness, adjust the Intnsty (Intensity) parameter in the Dsplay (Display) Menu.
Version
KbdLock
1. Navigate to Setup ▼ Comm ► ... ►Program ▼ PwrUpM ► ... ► Dsplay ▼Bright .
2. Press . Intnsty displays.
3. Press . The currently configured parameter displays.
4. Press or
NOTE: Brightness is set from 1–6 (16.67–100% screen brightness) or as DayLVL (uses Day, Night and DayLVL parameters
to automatically adjust brightness for day and night). For additional information about brightness, see
page 60Section 5.2.3 on page
5. Press . Day displays.
6. Press to exit the menu and load the new brightness setting.
34 Visit our website
Setup Mac ID
Comm Format
Figure 3-12. DfltCfg Parameter Menu Path
to reset the configuration setting. OK displays.
Setup
Format Program
Dsplay
Bright
Intnsty
Figure 3-13. Color Parameter Menu Path
repeatedly until the desired brightness value is selected.
60.
www.RiceLake.com
Program SFormt
Mac ID
SFormt
Day Night
Digio DfltCfg
DayLVL
Section 5.2.3 on