Table of Contents
Advertisement
LaserLight Series
2.4.6
Reset Switch
The reset switch enables a simulated power up reset. It goes back to normal operation mode. The reset switch eliminates
having to unplug the unit to do a reset, see
2.4.7
Communicating with Indicators and LEDs
Small LEDs located on the CPU board flash when serial data is received or sent. The transmit indicators flash when data is
being sent out of the port. The receive indicator flashes when the data is received. A steady indicator on receive LEDs reflect a
connection with no streaming data, see
2.4.8
Decimal Point (7-Segment Display)
The primary display board has decimal LED's. These can be changed to commas by moving a jumper located on the front of
the display board
(Figure 3-2 on page
Ensure the decimal point/comma jumper is in the proper position on the display board.
www.RiceLake.com
10
Visit our website
Figure 2-10 on page 9
Figure 2-10 on page 9
for communication indicator locations on the CPU board.
12).
for the reset switch location on the CPU board.
Advertisement
Table of Contents
