Program Menu - Rice Lake LaserLight3 Series Technical Manual

LaserLight3 Remote Display
5.2.3

Program Menu

This section provides a flow chart and descriptions for the Program menu.
Version
Format
KbdLock
Parameter
Dsplay (Display Type) Changes how information is presented on the display with three parameters.
Bright configures the intensity of brightness displayed. Ambient light sensor detects light or brightness similar to a human eye.
These parameters configure how the ambient light sensor adjusts the brightness on the LaserLight3:
Type sets a predefined arrangement of information on the display; Settings:
Color configures the color the display uses for characters. Settings; Red (default), Yellow, Green, Blue, Magenta, Cyan or
White
Contact Contact Information; See
Date Allows setting of the date format and date separator character
Time Allows setting of the time format and the separator character
KbdLock Keyboard lock, disables keyboard except for the menu and power key. Settings: Off (default), On
60 Visit our website
Setup Mac ID
Program SFormt
Display
Contact
Figure 5-9. Program Menu
Day – Select brightness during day; Brightness is set from 1–6 (16.67–100%) of full brightness; light sensor
averages measured ambient light continuously over a 5-second time span; Day values = % of maximum
brightness; Settings: 1, 2, 3, 4 (default), 5, 6
Night – Select brightness during night; Brightness is set from 1–6 (16.67–100%) of full brightness; light sensor
averages measured ambient light continuously over a 5-second time span; Night values = % of maximum
brightness; Settings: 1, 2, 3, 4 (default), 5, 6
DayLVL – DYLVL is The ambient brightness threshold at which the display changes from night to day mode and
vice versa; Settings range between 1 through 10 with 1 requiring less intense light to change to day mode
and 10 requiring more intense light to change from night to day mode; Select the daylight level at which the
display switches to DAY brightness mode; This may require some trial and error, due to the unique lighting
conditions of the environment; Settings: 1, 2, 3, 4 (default), 5, 6, 7, 8, 9, 10
Intnsty – Brightness is set from 1–6 (16.67–100%) of full brightness or as DayLVL (uses Day, Night and DayLVL
parameters to automatically adjust brightness for day and night); Settings: 1, 2, 3, 4, 5, 6 (default), DayLVL
Standard (default) – sets display with about 5 in weight digits with annunciators stacked on the right side
Legacy – sets display with about 3.75 in weight digits with annunciators across the bottom
Section 5.2.3.1 on page 61
Format – Settings: MMDDYY (default), DDMMYY, YYMMDD, YYDDMM
Date Separator – Settings: Slash (default), Dash, Semi, Dot
Format – Settings: 12HOUR (default), 24HOUR
Time Separator – Settings: Colon (default), Comma, Dot
Table 5-9. Program Menu Parameters
www.RiceLake.com
Date Time
Description
KbdLock