CHAPTER 3
B. Main Motor
1) Remove the drive assembly.
(See III-B of Chapter 3.)
2) Remove the 2 screws, and detach the main motor.
[2]
[1] Screw
[2] Main motor
Figure 3-6-2
3 - 16
[1]
C. Pick-up Solenoid
1) Remove the drive assembly.
(See III-B of Chapter 3.)
2) Disconnect the connector J204 from the engine
controller PCB; then, remove the screw, and
detach the pick-up solenoid.
[3]
[1]
[2]
[1] Connector
[2] Screw
[3] Pick-up solenoid
Figure 3-6-3