Canon LASER CLASS 810 Service Manual page 268

Chapter 16
16.3.8 SSSW-SW14
16.3.8.1 List of Functions
Bit
0
1
2
3
4
5
6
7
16.3.8.2 Detailed Discussions of Bit 2
Use it to specify whether to convert or not convert an inch-configuration resolution into a millimeter-configuration resolution for image read in G3 transmission:
either in sub scanning direction only or in both main and sub scanning directions. The setting is valid only when bit 1 of SW05 of #SSSW is set to '1'.
16.3.8.3 Detailed Discussions of Bit 4
Use it to specify whether to declare or not declare an inch-configuration resolution to the other machine for G3 communication: if 'declare' is selected, the machine
will indicate that it reads and records at an inch-configuration resolution using the DIS, DCS, or DTC signal.
16.3.9 SSSW-SW25
16.3.9.1 List of Functions
Bit
0
1
2
3
4
5
6
7
16.3.9.2 Detailed Discussions of Bit 0
Transmitted telephone number could be selected on the report indication after the transmission.
If the "Initiation number" is selected, report will indicate the telephone number of the initiation side.
If the "Receiver's number" is selected, report will indicate the phone number (CSI signal data) which is sent by the receiver's side.
16.3.9.3 Detailed Discussions of Bit 2
At "1" on this Bit, ignore the void CSI if received and if the dial has been made at this point, the dialed number will be indicated on the LCD/ Report screen.
At "0" on this Bit, even though the dialed number is acknowledged, LCD/Report screen will indicate nothing.
16-14
Function
not used
not used
direction of scanning for inch/mm conversion
not used
inch-configuration resolution declaration
not used
not used
not used
Function
procedure of V.8 on the initiation side
not used
If void CSI has been received, handle as non-received
CSI.
not used
not used
not used
not used
not used
T-16-10
1
-
-
both main and sub
scanning directions
-
declare
-
-
-
T-16-11
1
receiver's number
-
Yes
-
-
-
-
-
0
-
-
sub scanning
direction only
-
do not declare
-
-
-
0
initial call number
-
No
-
-
-
-
-
0011-4110
0011-4109
0011-4111
0017-8044
0017-8045
0017-8046