Canon LASER CLASS 810 Service Manual page 113

- Widthwise direction
b. Method used in the banner mode
In the banner mode, the following two document detection functions are used.
Function
Document presence/
absence detection
Document length detection Detects the length according to the distance from the point
2. Document presence/absence detection
Presence/absence of document on the document tray is detected by the document set sensor (SR2001).
When document is placed on the document tray, the document detection levers move along with the light shielding plate, allowing light to pass through the photo
interrupter. Thus, the document set sensor (SR2001) generates a document detection signal (EMPTY) to notify the host machine of presence of document under
the control of the reader controller PCB.
3. Document Size Detection
When the size of the document set on the document tray is detected, the feeding-direction length is detected by the document length sensor 1 (SR2009) and document
length sensor 2 (SR2010) and the widthwise length is detected by the document width sensor 1 (SR2007) and document width sensor 2 (SR2008).
When document is placed on the document tray, the levers of two document length sensors move along with the light shielding plate, shutting out the light to the
photo interrupter.
When you adjust the slide guide to the document size, the light emitted to the two document width sensors inside the document tray is blocked by the light-shielding
plate mounted at the bottom of the slide guide.
The document size is identified by the combination of the document length sensor states (ON/OFF) and the document width sensor states (ON/FFF).
Function
Detects the width of the document set on the document pickup
tray.
Detects presence or absence of document on the document
pickup tray.
where the document edge sensor (SR2002) turns on to the
point where this sensor turns off.
Reader controller PCB
Detection lever
SR2001
Description
T-5-5
Description
Document
F-5-6
Sensor used (Symbol)
Document width sensor 1/2
(SR2007/SR2008)
Sensor used (Symbol)
Document set sensor (SR2001)
Document edge sensor (SR2002)
Chapter 5
5-5