Setting The Paper - Canon LASER CLASS 810 Service Manual

Chapter 2
6)Open the left cover [1].
[1]
7)Hold the toner cartridge by its handle. Insert the toner cartridge into the
machine with the arrows [1] on the toner cartridge pointing toward the
machine.
8)The right side protrusions ([1] and [2]) of the toner cartridge should be
aligned with the guides inside the machine. The blue tab [3] should be
pulled up as seen in figure.
[3]
9)Close the left cover [1].
[1]
2-6
F-2-10
[1]
F-2-11
[2]
F-2-12
F-2-13

2.2.3 Setting the Paper

1)Holding the knob [1] at the center of the cassette, draw out the cassette [2]
until it stops.
2) To change the paper size, change the position of the back edge paper guide
[1].
[1]
3)Load the paper stack print side up. Make sure the back edge of the paper
stack touches the rear paper end guide [3], the paper stack should not ex-
ceed the load limit mark [1], and the load is under the hooks [2] on the
paper guides.
[2]
[2]
[1]
F-2-14
[1]
A:LTR
B:OFI
C:FLSC
D:MOFI
E:LGL OR BOFI
A B C D E
F-2-15
[1]
[3]
F-2-16
0016-9963