CHAPTER 3
B. Main Motor
1) Performing the drive unit removal pro-
cedures on page 3-6, remove the drive
unit.
2) Remove the 2 screws, and then the
main motor.
3 - 18
C. Pick-up Solenoid
1) Performing the drive unit removal pro-
cedures on page 3-6, remove the drive
unit.
2) Disconnect the connector from the
engine controller PCB, remove the
screw and then the pick-up solenoid.
Connector
Screw
Pick-up solenoid
Figure 3-6-2