Special Chromeleon Functions; Predictive Performance - Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual

UltiMate 3000 Series:
LPG-3400XRS Pump

5.5 Special Chromeleon Functions

This section provides a short overview of some special functions that Chromeleon supports
for the pump.
To learn more about ...

Predictive performance

Using the digital inputs
Operational Qualification and Performance Qualification
All of these functions are available in the Commands dialog box (unless otherwise noted).
In addition, some functions are available also on the control panel for the pump. For
additional information about a function, see the Chromeleon Help.
5.5.1 Predictive Performance
Predictive Performance provides various functions for estimating the lifetime of
consumables and for monitoring and recording service and (re)qualification information.
Commands Dialog Box
Open the Commands dialog box for the pump and enter the limits for the predictive
performance parameters. For a list of the commands and counters that are supported for the
pump, see the Chromeleon Help.
To keep the predictive performance information up-to-date, Thermo Fisher Scientific
recommends the actions listed in the table.
After you have ...
Replaced the valve cartridges
Replaced a piston
Replaced the piston seal
Replaced the entire pump head assembly
Serviced the pump (for example, annual maintenance)
Performed instrument qualification
1
Listed in the Commands dialog box under PumpModule > [Pump Device Name]_Wellness_LeftBlock
2
Listed in the Commands dialog box under PumpModule_Wellness
For information about the [Pump Device Name], see page 49.
These commands reset the related counters and update the information when the action
was performed.
Page 86
Perform the following command ...
CheckValveServiceDone
1
PistonsChanged
1
SealChanged
CheckValveServiceDone
1
SealChanged
2
ServiceDone
2
QualificationDone
Operating Instructions
See page ...
See next section
87
87
1
1 1
, PistonsChanged ,