8. Connect the solvent supply lines from the reservoirs to the inlets of the inbuilt vacuum
degasser.
Make sure that the supply lines are connected to the degasser inlets correctly. The
colors of the ferrules on the degasser inlets should match the colors of the ferrules
connected to the degasser outlets.
9. For the secure and functional positioning of the solvent reservoirs in the
UltiMate 3000 system, place them in the reservoir tray of the SR-3000 Solvent Rack
or the OAS-3x00TXRS autosampler.
Operating Instructions
UltiMate 3000 Series:
LPG-3400XRS Pump
Page 61