SETUP
REPLACING THE BATTERY PACK
Use the following procedure to change the reader's battery:
1. With a narrow metallic object (i.e. a coin) or a screwdriver, unscrew the battery
2.
20
GRYPHON™ I GD/GBT/GM4500
NOTE: Before proceeding, read "Battery Safety" on page 2 . To ensure max-
imum performance, Datalogic recommends the replacement of the
rechargeable battery pack if you note either of the following conditions:
•
battery life drops below approximately 80% of the original life;
•
battery charging time increases significantly.
cover screw.
Extract the battery pack from its slot.