Oil - Cessna Grand Caravan 208B G1000 Manual

CESSNA
MODEL 208B G1000

OIL

OIL GRADE (SPECIFICATION)
Oil conforming to Pratt & Whitney Engine Service Bulletin No. 1001,
and all revisions or supplements thereto, must be used. The oils listed
below comply with the engine manufacturers specification PWA521
and have a viscosity Type II rating. These oils are fully approved for use
in Pratt & Whitney Canada commercially operated engines. When
adding oil, service the engine with the type and brand that is currently
being used in the engine. Refer to the airplane and engine
maintenance records for this information. Should oils of different
viscosities or brands be inadvertently mixed, the oil system servicing
instructions in the Maintenance Manual shall be carried out.
• BP Turbo Oil 2380
• Exxon Turbo Oil ETO 85 (Third generation lubricant)
• Aero Shell Turbine Oil 500
• Aero Shell Turbine Oil 555
• Aero Shell Turbine Oil 560 (Third generation lubricant)
• Royco Turbine Oil 500
• Royco Turbine Oil 555
• Royco Turbine Oil 560 (Third generation lubricant)
• Mobil Jet Oil II
• Mobil Jet Oil 254 (Third generation lubricant)
• Castrol 5000
• Turbonycoil 600
•
Do not mix brands or types of oils.
•
When
formulation to a "third generation" lubricant
formulation (see list above), the engine manufacturer
strongly recommends that such a change should
only be made when an engine is new or freshly
overhauled. For additional information on use of third
generation oils, refer to the engine manufacturer's
pertinent oil service bulletins.
208BPHBUS-00
HANDLING, SERVICE, AND MAINTENANCE
CAUTION
changing from
(Continued Next Page)
an existing lubricant
U.S.
SECTION 8
8-15