Cessna Grand Caravan 208B G1000 Manual page 350

SECTION 6
WEIGHT & BALANCE/EQUIPMENT LIST
CABIN CARGO AREA
•
When utilized, the cargo barrier and its attached
nets provide cargo forward crash load restraint
and protection of the pilot and front passenger;
however, the cargo must still be secured to
prevent it from shifting due to takeoff, flight,
landing,
decelerations. On the passenger version, if
passengers, as well as cargo, are located aft of
the barrier,
movement and exit of the passengers and the
cargo must be secured for crash load restraint
conditions. Refer to Cargo Load Restraint in this
section for additional information concerning
cargo restraint with and without a cargo barrier.
•
Make sure the barrier net fasteners are secured
for takeoff, flight, and landing operations, and
are momentarily detached only for movement of
the nets for loading or unloading of items
through the crew area.
Cargo partition nets are available and can be installed to divide the
cargo area into convenient compartments. Partitions may be installed in
all of the five locations at Fuselage Stations 188.7, 246.8, 282.0, 307.0
and 332.0. The cargo partitions are constructed of canvas with nylon
webbing reinforcement straps crisscrossing the partition for added
strength. The ends of the straps have quick-release fasteners which
attach to the floor tracks and two floor-mounted anchor plates located
just forward of the raised cargo floor and other anchor plates on the
sidewalls and ceiling. Four straps have adjustable buckles for
tightening the straps during installation of the partition. Refer to the
Cargo Partition Nets figure for additional details.
Zones divided by cargo partitions can be loaded without additional tie-
downs if a total loaded density for each partitioned zone does not
exceed 7.9 pounds per cubic foot and the zone is more than 75% full.
Cargo loading that does not meet these requirements must be secured
to the cabin floor.
U.S.
6-20
(Continued)
WARNING
and taxi
cargo placement
(Continued Next Page)
MODEL 208B G1000
accelerations
must
208BPHBUS-00
CESSNA
and
allow