Display Unit Failure - Cessna Grand Caravan 208B G1000 Manual

SECTION 3
ABNORMAL PROCEDURES

DISPLAY UNIT FAILURE

This is indicated by a complete loss of image on a display. If only
individual elements of the display are failed, refer to appropriate
procedures for the individual failures.
IF PFD
1. DISPLAY BACKUP Button . . . . . . . . . . . . . PRESS (if required)
Flight and EICAS information are displayed on the MFD.
The PFD CDI SYNC and BARO SYNC settings must be ON
to allow the copilot's PFD controls to affect settings on the
MFD. These settings are accessible using the PFD MENU
button.
2. Flight Director . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TRANSFER
3. FD Modes/AUTOPILOT . . . . . . RESELECT and REENGAGE
4. Transponder . . . . . . . . . . . SWITCH (to operating transponder)
5. COM and NAV Radios. . . . . . . . . . . . . . . . . . . . . . . . . SWITCH
6. PFD Controls. . . . . . . . . . . . . . . . . . . . . USE OPERATING PFD
(for required data entry (Com, Nav, Baro setting, etc.)
IF MFD
1. Either DISPLAY BACKUP Button . . . . . . . . . . . . . . . . . PRESS
3-58
NOTE
(to operating Com and Nav radios)
(EIS info will be displayed on PFDs)
U.S.
MODEL 208B G1000
((XFR button) to operating PFD)
FAA APPROVED
208BPHBUS-01
CESSNA
(as required)