Appendix A - Impulse 6000D/7000Dp Remote Operation; Ansur Test Guide - Fluke Biomedical Impulse 6000D User Manual

Ansur Test Guide

This appendix describes using the Ansur plug-in software
to execute tests on the Analyzer.
When a test is executed with the Impulse 6000D/7000DP
Plug-in, the TEST GUIDE window opens. Use the TEST
GUIDE to step through each element in the test
procedure. Figure 30 shows the TEST GUIDE for an
Energy Measurement test. The panes function as follows:
•
Left pane – displays either the default explanation or
one entered when a custom template was created.
•
Right pane – provides step-by-step directions for the
test being performed.
Impulse 6000D/7000DP Remote Operation
•
Test results pane – the bottom pane that displays
results of the test being run.
In this example, the screen directs the setting of the
energy level for the DUT, in this case a defibrillator. Press
Start on the TEST GUIDE toolbar to begin the test.
Analyzer measurement results appear in the Test results
pane.
Appendix A
41