Item
Name
1
Charge Status LED
Battery Charger
2
connector
3
Scope output
4
Hi-level ECG output
5
Computer Port
Turning the Analyzer On and Off
Before using the Analyzer for the first time, plug
the battery charger into the Analyzer and a power
outlet and charge the Analyzer for at least 4
hours.
Press the power button (O) on the top panel to turn the
Analyzer on. After a short self-test period, the Analyzer will
display the screen shown in Figure 3 to indicate it is ready
for operation.
Table 3. Rear-Panel Connections
Indicates RED while battery is charging. Indicates GREEN when the battery is fully
charged and the charger is still connected.
Input connector for attaching the battery charger to the Analyzer.
Output signal jack for displaying the defib playback wave on an oscilloscope.
High-level ECG signal output jack for oscilloscope viewing.
Device Port (B-style USB) for controlling the Analyzer from a PC or instrument controller.
Note
Defibrillator/Transcutaneous Pacemaker Analyzer
Description
Figure 3. Analyzer Ready Display
Battery condition is displayed in the upper right-hand
corner of the display (S) when a top-level menu is
displayed. When a low battery is indicated, attach the
battery charger to the Analyzer and plug it into a power
outlet.
Turning the Analyzer On and Off
fak01.eps
7