Talk-a-Phone WEBS-PA-1 Configuration And Operation Manual page 56

Hide thumbs Also See for WEBS-PA-1:
Table of Contents

Advertisement

Appendix C: Sample Serial Configuration File
Led3 = 3
Led3SwitchOn = *98*
Led3DurationType = 1
+Led3Duration = 10
Led3SwitchOff = *97*
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name
: GuardAccessCode
++ Description
: Admin can set the guard access code using this field..
++ Valid values
: Maximum length 8 digits(0-9).
++
GuardAccessCode = *4** (Default Guard access code)
++
It will accept the values in the following format.
++
*4*<xxxxxxxx>* , x can be 0-9 or blank
++ Note
: None
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
GuardAccessCode = *4**
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name
: AuthVolAdjust , AuthSpkrMicCtrl, AuthVoiceMessage ,
++
AuthAuxOPOperation , AuthLED3Operation
++ Description
: Admin can configure the authetication for different
++
operations.
++
++
++
++
++
++ Valid values
: 0 - To disable Authentication
++
1 - To enable Authentication
++ Note
: None
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
AuthVolAdjust
= 0
AuthSpkrMicCtrl
= 1
AuthVoiceMessage
= 1
AuthAuxOPOperation = 1
AuthLED3Operation
= 0
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name
: NetworkMode
++ Description
: It configures the Phone IP address Type.
++ Valid values
: NetworkMode
++
NetworkMode
++ Note
: If NetworkMode = 3, must configure following
++ Field name
: IPAddress
++ Field name
: Netmask
++ Field name
: Gateway
++ Field name
: DNSServerIP
++
++ Description
: IPAddress
++
Netmask
++
Gateway
++
DNSServerIP - The DNS Server IP Address - optional
++
++
++
++
++
++
++
++ Note
: NetworkMode = 3 (Static) should not applied in bulk update.
56
a. Volume Adjustment During Call
b. Speaker and Microphone Control During Call
c. Voice Messages
d. Aux o/p Activation Deactivation
e. "Help on the way" LED activation and deactivation
= 1 - DHCP
= 3 - STATIC (Default Value)
- Phone IP Address - mandatory
- The Subnet Mask Address - mandatory
- The Default Gateway address - mandatory
Example:
NetworkMode = 3
IPAddress = 192.168.1.10 (Default)
Netmask = 255.255.255.0 (Default)
Gateway = 192.168.1.1 (Default)
DNSServerIP = (Default blank)
Talk-A-Phone Co.

Advertisement

Table of Contents
loading

Table of Contents