Talk-a-Phone WEBS-PA-1 Configuration And Operation Manual page 30

Using the Web GUI
•
Firmware upgrade initiated. Do not reboot...: The firmware upgrade has been initiated; the
firmware upgrade request is processed only when the Communications Module is in an idle
state. For example, a page is in progress and administrator requests for a firmware upgrade
through the Web GUI. The Communications Module checks for an active page every five
seconds and starts the process once the active page is terminated.
The following are considered to be idle Communications Module states: no active paging and
the Auxiliary Output is deactivated.
•
Firmware upgrade in progress. Do not reboot...: The firmware upgrade is in progress. The
process generally takes around 1-2 min to complete.
•
Firmware upgrade done. Going to reboot...: The firmware upgrade is complete and a reboot
has been initiated. After approximately one minute, the Communications Module will be
accessible once again.
30 Talk-A-Phone Co.