Using The Web Gui; Web Gui Layout - Talk-a-Phone WEBS-PA-1 Configuration And Operation Manual

Using the Web GUI

4 Using the Web GUI
This section describes various configurable options available from the Web Interface of the
Communications Module. It is the primary interface for configuring and monitoring the
Communications Module. You must assign an IP address (Refer to 4.4.1 IP Settings) before
configuring the features of the Communications Module.

4.1 Web GUI Layout

This section describes the layout of the Web GUI.
2
The Web GUI layout is divided into four sections:
Header: The Header section displays Talk-A-Phone Logo and product title "Communications
1
Module". The right side of the header has the Refresh, Help, and Logout buttons. The Refresh
button is used to reload the content section. The Help button provides help content from the Talk-
A-Phone website. The Logout button logs out the user. The Apply button will not be grayed out if
the content pane (3) contains configurable parameters. The Apply button is used to save
configuration changes to the WEBS-PA-1.
15
3a
4
Figure 3 Using Web GUI
1
3b
3c
3
Talk-A-Phone Co.