Talk-a-Phone WEBS-PA-1 Configuration And Operation Manual page 44

Appendix C: Sample Serial Configuration File
++ operations
++ Valid values : 5 - 20 secs, in increment of 1 sec
++ Default value is 5 secs
++ Note : None
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
TimerInterDigitRemote = 5
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : CallConversation
++ Description : Used for limiting Call Conversation time.
++ Valid values : CallConversation = 0 , Calls lasts indefinite
++ CallConversation = 1 Calls lasts for definite time
++
++ Field name : TimerCallConversation
++ Description : Call Conversation time, call only lasts for this time,
++ applicable when CallConversation = 1
++ Valid values : 1 - 360 minutes in increments of 1 minute.
++ Default value is 12 minutes
++ Note : None
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
CallConversation = 1
TimerCallConversation = 12
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : RingBackBusy
++ Description : Enable/Disable Ringback Busy Timer.
++ Valid values : RingBackBusy = 0 , Call waits for indefinite
++ RingBackBusy = 1 Calls waits for definite time before
++ switching to next number
++
++ Field name : TimerRingBackBusy
++ Description : Ringback busy time, call switch to next number after
++ waiting for this time, applicable when RingBackBusy = 1
++ Valid values : 1 - 60 seconds in increments of 1 sec.
++ Default value is 15 seconds
++ Note : Only applicable to Outbound Round Robin Calls
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
RingBackBusy = 1
TimerRingBackBusy = 15
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : HangupOnSilence
++ Description : Enable/Disable Hanging of call on silence
++ Valid values : HangupOnSilence = 0 - Disable
++ HangupOnSilence = 1 - Call disconnect on silence.
++
++ Field name : TimerHangupOnSilence
++ Description : Duration after which call disconnects automatically, if no
++ voice received.
++ Valid values : 10 - 360 seconds, in increments of 1 second.
++ Default value is 30 seconds
++ Note : None
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
HangupOnSilence = 1
TimerHangupOnSilence
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : PagingOut
++ Description : Output device for Paging messages.
44
= 30
Talk-A-Phone Co.